WHERE TO BUY?
RADIKAL TECHNOLOGIES
EFFEXX RT-1701: EURO RACK MULTI-FX PROCESSOR
OVERVIEW
The EFFEXX RT1701 offers two main FX processors with eight selectable FX algorithms each and three additional Pre and Post FXs, that are all simultaneously available. The eight selectable FX-algorithms are: Delay, Vintage Delay, Chorus, Phaser, Flanger, Rotor cabinet emulation, Pitch Shifter, and String Filter. The additional FXs are a Gain Stage with Overdrive, a post-EQ/multimode filter section, and a fully editable Reverberation effect. The delay times and modulation rates can be controlled with a Tap-function. Just hit the Tap-button 4 times with quarter notes of the current beat and the EFFEXX will adapt the correct tempo automatically.
For each FX program, the EFFEXX stores up to eight FX setting snapshots. Snapshots can be used to recall a desired FX parameter set easily and quickly. But there is much more. A built-in LFO allows for creating smooth transitions between the snapshots. Furthermore, you can synchronize this LFO to an external clock signal or control the snapshot selection with a control voltage. Snapshots do not only store the settings of FX parameters. They hold a value for an external control voltage as well. With this control voltage, you can control a parameter of any other module.
There is another control voltage input for the post-filter frequency control. Besides EQ functions the post-filter can be used as a multimode filter with lowpass, bandpass, and highpass settings. Control the post filter with an external envelope and change the color of the EFFEXX input signal with the different effects the RT1701 offers. A lot of new synthesizer sounds can be created with that setup.
The string filter creates astonishing Karplus Strong sounds. The control voltage input can be used to control the frequency of this algorithm with 1 Volt/Octave. With that feature, the EFFEXX can be used as a Karplus Strong oscillator.
Share your best FX programs with other EFFEXX users by sharing audio setup files. Archive all your programs in a DAW, an iPad or even your mobile phone.
SPECIFICATIONS
Audio Input: 46,875 KHz, 24 Bit
Audio Output: 46,875 KHz, 24Bit
Control Input: 29,26 KHz, 24 Bit
Control Output: 29,28 KHz, 24 Bit
Gate/Sync: triggers above 0.5 Vss
Delay RAM memory: 32 MB
Flash Memory: 2 MB
DSP Speicher: 256kBytes
DSP speed: 360MHz
DSP Core: 3600 MIPS, 2700 MFLOPS
Poti A/D Conversion 10 Bit
Parallel Poti scanning: 3 KHz
Panel Poti update rate: 3 KHz
Power Consumption: +12V 250 mA -12V 40 mA 5V 0 mA
EFFEXX RT1701 DEMO
What does EFFEXX sound like?
6 Operating Modes.
I. Manual Mode
II. Interpolator Mode
III. EDIT Snapshot Mode
IV. Konfigurations-Edit Mode
V. Memory Mode (Save and load programs)
VI. Photo-Mode
Vintage Delay.
The Vintage Delay is designed to simulate the behavior of tape-based echo devices by bending the pitch as the delay time changes. With the Vintage Delay, you can also select very short delay times to produce feedback flanger alike sound FXs.
TURN IT UP A NOTCH
Download manuals, firmware updates, and other content for your EFFEXX.